Vakansiya haqqında

Hexon is developing industrial monitoring solutions that connect physical equipment with useful operational data. We are looking for a hands-on engineer to take ownership of device integration, hardware evaluation and reliable data delivery to our software team. The role combines commercial sensor, meter and gateway integration with custom electronics and embedded firmware development where a defined project requires it. You will work directly with the founder and software/data team, with practical responsibility from equipment assessment through testing and technical handover.

Location Baku, Azerbaijan, with site visits

Engagement Part-time or project-based

Compensation Competitive, based on experience and agreed scope

What you will do

  • Assess customer sites and equipment to define suitable measurement points, connectivity requirements and installation constraints.
  • Evaluate sensors, current transformers, energy meters and industrial gateways; compare compatibility, documentation, reliability and cost.
  • Configure and integrate devices using RS485, Modbus RTU/TCP and MQTT; diagnose communication and data-quality problems.
  • Deliver correctly identified, timestamped data with documented units, scaling and quality indicators to an agreed backend endpoint. Work with the software team on the payload and delivery contract.
  • Test connectivity loss, recovery and missing or stale readings; document limitations and avoid reporting missing data as a valid measurement.
  • Develop and test embedded firmware, interfaces and custom electronics prototypes for agreed use cases. Assess when an existing product is the better solution.
  • Coordinate installation and commissioning with qualified electricians and site personnel under the site's safety procedures.
  • Validate readings against an appropriate reference and document test methods, results and unresolved discrepancies.
  • Prepare equipment lists, configuration records, integration diagrams, test reports and repeatable installation and troubleshooting guides.
  • Investigate field issues, work with suppliers and hand over maintainable solutions to the wider team.

What we are looking for

  • Demonstrated hands-on experience integrating industrial sensors, meters, gateways or connected equipment beyond classroom demonstrations.
  • Practical understanding of RS485 and Modbus, including register interpretation, data types, scaling and communication troubleshooting.
  • Experience with MQTT, IP networking and secure device-to-backend connectivity.
  • Ability to read electrical schematics and manufacturer documentation and evaluate measurement-device compatibility.
  • Practical embedded C/C++ experience, microcontroller development and electronics prototyping/debugging; ability to explain your personal contribution to a working design.
  • Ability to validate measurements, investigate faults systematically and produce clear technical documentation.
  • Sound electrical-safety judgment and willingness to coordinate with qualified installation professionals.
  • Availability for site visits in Baku; any travel outside Baku will be agreed in advance.
  • Ability to communicate with local site teams and read technical documentation in English.
  • We welcome relevant backgrounds in industrial automation, instrumentation, electrical/electronics engineering or embedded systems. Evidence of work delivered matters more than your previous job title.

Useful additional experience

  • Schneider Electric meters, Teltonika gateways, Milesight devices or comparable industrial equipment.
  • LoRaWAN, cellular IoT, OPC UA, PLC/SCADA integration or industrial Ethernet.
  • PCB design, prototype bring-up, enclosure selection and planning for product testing and compliance.
  • Python or similar tools for diagnostics and test automation.
  • Device authentication, certificate management and reliable operation on intermittent networks.

Please include:

  • The devices and protocols involved, your personal contribution and a difficult technical issue you resolved.
  • Any shareable diagrams, photographs of non-sensitive prototypes, firmware samples or test reports. Please do not send confidential employer/customer material or credentials.
  • Your availability, preferred engagement model and expected monthly compensation or project/day rate.
  • Email subject: Industrial IoT Engineer - Your name

Hexon is developing industrial monitoring solutions that connect physical equipment with useful operational data. We are looking for a hands-on engineer to take ownership of device integration, hardware evaluation and reliable data delivery to our software team. The role combines commercial sensor, meter and gateway integration with custom electronics and embedded firmware development where a defined project requires it. You will work directly with the founder and software/data team, with practical responsibility from equipment assessment through testing and technical handover.

Location Baku, Azerbaijan, with site visits

Engagement Part-time or project-based

Compensation Competitive, based on experience and agreed scope

What you will do

  • Assess customer sites and equipment to define suitable measurement points, connectivity requirements and installation constraints.
  • Evaluate sensors, current transformers, energy meters and industrial gateways; compare compatibility, documentation, reliability and cost.
  • Configure and integrate devices using RS485, Modbus RTU/TCP and MQTT; diagnose communication and data-quality problems.
  • Deliver correctly identified, timestamped data with documented units, scaling and quality indicators to an agreed backend endpoint. Work with the software team on the payload and delivery contract.
  • Test connectivity loss, recovery and missing or stale readings; document limitations and avoid reporting missing data as a valid measurement.
  • Develop and test embedded firmware, interfaces and custom electronics prototypes for agreed use cases. Assess when an existing product is the better solution.
  • Coordinate installation and commissioning with qualified electricians and site personnel under the site's safety procedures.
  • Validate readings against an appropriate reference and document test methods, results and unresolved discrepancies.
  • Prepare equipment lists, configuration records, integration diagrams, test reports and repeatable installation and troubleshooting guides.
  • Investigate field issues, work with suppliers and hand over maintainable solutions to the wider team.

What we are looking for

  • Demonstrated hands-on experience integrating industrial sensors, meters, gateways or connected equipment beyond classroom demonstrations.
  • Practical understanding of RS485 and Modbus, including register interpretation, data types, scaling and communication troubleshooting.
  • Experience with MQTT, IP networking and secure device-to-backend connectivity.
  • Ability to read electrical schematics and manufacturer documentation and evaluate measurement-device compatibility.
  • Practical embedded C/C++ experience, microcontroller development and electronics prototyping/debugging; ability to explain your personal contribution to a working design.
  • Ability to validate measurements, investigate faults systematically and produce clear technical documentation.
  • Sound electrical-safety judgment and willingness to coordinate with qualified installation professionals.
  • Availability for site visits in Baku; any travel outside Baku will be agreed in advance.
  • Ability to communicate with local site teams and read technical documentation in English.
  • We welcome relevant backgrounds in industrial automation, instrumentation, electrical/electronics engineering or embedded systems. Evidence of work delivered matters more than your previous job title.

Useful additional experience

  • Schneider Electric meters, Teltonika gateways, Milesight devices or comparable industrial equipment.
  • LoRaWAN, cellular IoT, OPC UA, PLC/SCADA integration or industrial Ethernet.
  • PCB design, prototype bring-up, enclosure selection and planning for product testing and compliance.
  • Python or similar tools for diagnostics and test automation.
  • Device authentication, certificate management and reliable operation on intermittent networks.

Please include:

  • The devices and protocols involved, your personal contribution and a difficult technical issue you resolved.
  • Any shareable diagrams, photographs of non-sensitive prototypes, firmware samples or test reports. Please do not send confidential employer/customer material or credentials.
  • Your availability, preferred engagement model and expected monthly compensation or project/day rate.
  • Email subject: Industrial IoT Engineer - Your name

Bu vakansiyaya uyğunsan?

CV‑ni yüklə — 10 saniyəyə uyğunluq faizini, bazar dəyərini və CV‑də çatışmayanı gör.

Yerləşmə
Bakı
Təcrübə
Middle
Məşğulluq
Yarım ştat
Əməkhaqqı
Göstərilməyib
Yerləşdirilib
17 noyabr 2026
Dillər
English
Son tarix
17 dekabr 2026
Baxış
16

Şirkət haqqında

Müraciətin

Bu işəgötürən müraciətləri öz saytında qəbul edir. Vakansiyanın səhifəsinə keç və oradakı formanı doldur.

İşəgötürənin səhifəsinə keç

Tanışına uyğundur?

Dostun linkdən birbaşa müraciət edə bilər

Bu vakansiya haqqında suallar

İş yeri Bakı şəhərindədir.

İş part-time və ya layihə əsaslıdır.

Əmək haqqı təcrübəyə və razılaşdırılmış iş həcminə əsaslanır.

Namizəd cihazlar və protokollar, şəxsi töhfə və çətin texniki məsələlər barədə məlumat verməlidir, həmçinin nümunə diaqramlar, prototiplər, firmware nümunələri və test hesabatları təqdim edə bilər.

Namizəd müraciət üçün sənədləri və məlumatları e-poçt vasitəsilə göndərməlidir. Bu səhifədəki «Müraciət et» düyməsi işəgötürənin öz müraciət səhifəsinə aparır.

Müraciət formasına keç

Oxşar vakansiyalar

Bütün oxşar vakansiyalar

Əməliyyat mühəndisi üzrə Bakıda digər açıq elanlar.

Hexon
MütəxəssisBakı
Maaş göstərilməyib

Sənaye sensorlarının və cihazlarının inteqrasiyasını həyata keçirir, RS485 və Modbus bilikləri tələb olunur

Technical DocumentationIP NetworkingC#Electrical Schematics Reading+3
Müraciət etBirbaşa işəgötürənəBirbaşa işəgötürənə
“socar Petroleum” Qsc
MütəxəssisBakı
Maaş göstərilməyib7 gün qalıb

Mexaniki və texnoloji avadanlıqların istismarı və təmirini təşkil etmək üçün texniki bilik tələb olunur

Mechanical Equipment OperationTechnical MaintenanceAutoCADPlanning+10
Müraciət etBirbaşa işəgötürənəBirbaşa işəgötürənə
Fluid Force Engineering
Mütəxəssis · 4–5 ilBakı

Mühəndis

1 000–2 000₼

Hidravlik avadanlıqların texniki baxışını və təmirini təşkil etmək üçün 4-5 il təcrübə tələb olunur

Technical InspectionPreventive MaintenanceQuality ControlHydraulic system maintenance+5
Müraciət etBirbaşa işəgötürənəBirbaşa işəgötürənə
SOCAR
Mütəxəssis · 1–5 ilBakı
Maaş göstərilməyib

NÖC və avtomatika üzrə mühəndis kimi təmir və istismar işlərini aparmaq üçün müvafiq sahədə təcrübə tələb olunur

Workplace SafetyTeam LeadershipPreventive MaintenanceMaintenance and repair+6
Müraciət et
Bütün oxşar vakansiyalar
Göstərilməyib
Sənaye İoT mühəndisi
Müraciət et