Инспектор по контролю качества сварочных работ

в Airswift

О роли

Qualifications & Experience: Education: Higher education Work Experience: 3 years or more in Oil and Gas Construction Industry Certificate: Valid “Welding Inspector - CSWIP 3.1.” And CSWIP BGAS Level II or NACE or ICORR certificates Knowledge of Languages: English (fluent), Azerbaijani (fluent). Responsibilities: I n accordance with the Quality Control Plan, execute the specific inspections on material, equipment and construction/installation activities on site, following relevant specified procedures, issuing the relevant Quality Records; Issue the relevant Quality Records and, when necessary, write and send to Quality Control Coordinator/Quality Control Manager (as applicable) non-conformances reports (where applicable the report shall be issued on PTS software); Verify/control the correct storage and certification of material and instrumentation calibration certificates; Witness/perform qualifications of coating processes; Check surface preparation; Check and record atmospheric conditions prior to starting of painting operations; Carry out wet and dry film thickness checks; Monitor observations of the correct coding cycles; Monitor wet film thickness; Verify the correct color-coding and painting; Perform visuals inspections; Perform adhesion testing; Perform penetration testing; Evaluate impact testing; Perform visual checks pre-blasting; Perform visual checks after blasting; Orderly collect and manage/check documents certifying test, controls and inspection documents, ensuring that all mechanical and testing related records are properly retrievable within the final As- Built dossier; In Case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/ Inspection Test Plans, witnessing inspection and collecting relevant Quality Control records; -In accordance with the Quality Control Plans, execute the specific inspections on materials, equipment and construction/installation activities on site issuing the relevant Quality Records; Verify welding parameters and consumables during operations Check availability of welding procedures (WPS/PQR) and qualifications; Witness mechanical test at laboratory during PQR execution; Check welders qualifications; Check the availability and suitability of the welding equipment consumables, pre-heating, welding, heat treatment, bevels, the extent of the repairs made by the various welders (taking any corrective action required), the heat treatment record diagrams; Ensure that all welding, heat treatment and any hardness testing are in compliance with the relevant codes and specifications; Perform pipes line up check, ensuring that all installed pipe/fittings are compliant to the correct specification and that the material is in accordance with the specified material traceability requirements; Carry out visual inspections and issues relevant reports; Orderly collect and manage/check documents certifying tests, controls and inspections documents, ensuring that all welding and testing related records are properly retrievable within the final As Built dossier; In case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/Inspection Test Plans, witnessing inspection and collecting relevant records

Qualifications & Experience: Education: Higher education Work Experience: 3 years or more in Oil and Gas Construction Industry Certificate: Valid “Welding Inspector - CSWIP 3.1.” And CSWIP BGAS Level II or NACE or ICORR certificates Knowledge of Languages: English (fluent), Azerbaijani (fluent). Responsibilities: I n accordance with the Quality Control Plan, execute the specific inspections on material, equipment and construction/installation activities on site, following relevant specified procedures, issuing the relevant Quality Records; Issue the relevant Quality Records and, when necessary, write and send to Quality Control Coordinator/Quality Control Manager (as applicable) non-conformances reports (where applicable the report shall be issued on PTS software); Verify/control the correct storage and certification of material and instrumentation calibration certificates; Witness/perform qualifications of coating processes; Check surface preparation; Check and record atmospheric conditions prior to starting of painting operations; Carry out wet and dry film thickness checks; Monitor observations of the correct coding cycles; Monitor wet film thickness; Verify the correct color-coding and painting; Perform visuals inspections; Perform adhesion testing; Perform penetration testing; Evaluate impact testing; Perform visual checks pre-blasting; Perform visual checks after blasting; Orderly collect and manage/check documents certifying test, controls and inspection documents, ensuring that all mechanical and testing related records are properly retrievable within the final As- Built dossier; In Case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/ Inspection Test Plans, witnessing inspection and collecting relevant Quality Control records; -In accordance with the Quality Control Plans, execute the specific inspections on materials, equipment and construction/installation activities on site issuing the relevant Quality Records; Verify welding parameters and consumables during operations Check availability of welding procedures (WPS/PQR) and qualifications; Witness mechanical test at laboratory during PQR execution; Check welders qualifications; Check the availability and suitability of the welding equipment consumables, pre-heating, welding, heat treatment, bevels, the extent of the repairs made by the various welders (taking any corrective action required), the heat treatment record diagrams; Ensure that all welding, heat treatment and any hardness testing are in compliance with the relevant codes and specifications; Perform pipes line up check, ensuring that all installed pipe/fittings are compliant to the correct specification and that the material is in accordance with the specified material traceability requirements; Carry out visual inspections and issues relevant reports; Orderly collect and manage/check documents certifying tests, controls and inspections documents, ensuring that all welding and testing related records are properly retrievable within the final As Built dossier; In case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/Inspection Test Plans, witnessing inspection and collecting relevant records

Подходишь ли ты на эту вакансию?

Загрузи CV — за 10 секунд увидишь процент совпадения, свою цену на рынке и чего не хватает в резюме.

Локация
Баку, Houston, TX
Опыт
3+ лет
Занятость
Полная занятость
Зарплата
Не указана
Опубликовано
13 июля 2026
Языки
English, Azerbaijani
Дедлайн
14 декабря 2026
Отклики через HRX
1
Просмотры
47

Зарплата на рынке

Работодатель сумму не назвал. По роли «Инженер по контролю качества» обычно платят 650–1 300 ₼, медиана — 1 110 ₼.

обычно платят столькоредко

48 открытых вакансий, 42 зарплат: объявления, анкеты, «Проверь зарплату».

Проверить свою зарплату как «Инженер по контролю качества»

О компании

Airswift
Oil & Gas · 1,000+ · Bakı
Все вакансии Airswift

Ваш отклик

Этот работодатель принимает отклики у себя на сайте. Перейдите на страницу вакансии и заполните форму там.

Перейти на страницу работодателя

Подходит знакомому?

Друг откликнется прямо по ссылке

Похожие вакансии

Все похожие вакансии

Другие открытые объявления по роли «Инженер по контролю качества» в городе Баку.

Sentra
НачинающийБаку
800₼

Контролирует качество сварочных работ и проверяет их соответствие стандартам.

Welding InspectionVisual TestingWelding Procedure Specification (WPS)Procedure Qualification Record (PQR)+4
ОткликнутьсяНапрямую работодателюНапрямую работодателю
ATA PACK MMC
Начинающий · 1+ летБаку
600₼

Контролирует качество печатной продукции в производственном процессе и имеет минимум 1 год опыта.

Quality ControlISO 22000Report PreparationColor Matching+10
ОткликнутьсяНапрямую работодателюНапрямую работодателю
Все похожие вакансии

Статьи по теме

Все материалы
Не указана
Инспектор по контролю качества сварочных работ
Откликнуться